Table of Contents
Advertisement
7
STEERING AND FRONT SUSPENSION
Figure 7-21 Press In Dust Seal
2
Figure 7-23 Rack and Pinion Resistance
FRONT SUSPENSION
Read DANGER and WARNING on page 7-1.
LUBRICATION
Two grease fittings are provided (one for each kingpin). Lubricate these fittings semi-annually with the proper
lubricant. See Periodic Lubrication Schedule, Section 10, Page 10-5.
∆
CAUTION
• To ensure proper lubrication of the front suspension, raise front of vehicle to lubricate. See
WARNING on page 7-1.
WHEEL ALIGNMENT
Wheel alignment is limited to adjusting the toe-in of the front wheels. See Toe-in Adjustment on page 7-15.
See following NOTE.
Page 7-14
2001/2002 Turf/Carryall 272 Gasoline Vehicle Maintenance and Service Manual
RUBBER MALET
15/16-INCH DEEP WELL
SOCKET
DUST SEAL
IN PLACE
3/8 INCH,
1/4 DRIVE,
DEEP WELL
SOCKET
1
7
Figure 7-22 Rack and Pinion Adjustment
Figure 7-24 Install Ball Joint
Front Suspension
8
Advertisement
Table of Contents
Troubleshooting
