Club Car TURF 272 Maintenance Manual page 524

16B
MC010C-BS00 UNITIZED TRANSAXLE WITH DIFFERENTIAL LOCK
Unitized Transaxle Removal, Continued:
SNUBBER
Figure 16b-32 Snubber
14. Grasp the ends of the leaf springs at the rear of the vehicle and roll the powertrain out from under the
vehicle (Figure 16b-33, Page 16b-16).
15. Place blocks under the engine pan so they will completely support the engine and keep it level to the floor
(Figure 16b-34, Page 16b-16). See following NOTE.
NOTE: Place the blocks so they will support the engine when the transaxle is detached and moved away
from the engine.
16. Remove the drive belt.
16.1. Grasp belt midway between drive and driven clutch and pull up on belt to force the driven clutch
sheaves apart. Roll the belt counterclockwise while pulling it off driven clutch (Figure 16b-35,
Page 16b-16).
17. Remove the driven clutch retaining bolt and remove the driven clutch from the unitized transaxle
(Figure 16b-36, Page 16b-17).
Figure 16b-34 Position Powertrain
Page 16b-16 2001/2002 Turf/Carryall 272 Gasoline Vehicle Maintenance and Service Manual
SNUBBER BRACKET
ENGINE
PAN
APPROX.
9 in. (22.9 cm)
Unitized Transaxle Removal
Figure 16b-33 Remove Powertrain
DRIVEN
CLUTCH
DRIVE CLUTCH
Figure 16b-35 Remove Drive Belt