Introduction - The Loksound Family; Members Of The Loksound Family; Loksound 5 - Esu LokSound 5 Installation And Operating Instructions Manual

Introduction - The LokSound family

5. Introduction - The LokSound family

5.1. Members of the LokSound family

The sound decoders fifth generation has been completely redeveloped. It
combines intelligently a sound module with a multi-protocol digital decoder.
Thus, a einzi- ger component to both the vehicle and the sound operation of the
locomotive is sufficient to map.
By using a new, high-performance 32-bit processor all the properties of the
previously known LokSound Deco could the be significantly improved once
again: LokSound 5 Deco of playing up to 10 sound channels simultaneously,
each channel thanks to 16-bit resolution and 31250 kHz Sample rate HiFi
achieved quality. With a LokSound decoder 5, the sound quality and dynamic
range of your locomotives are almost perfectly measure up to the original. 128
Mbit noise memory provide sufficient capacity reserves.
LokSound decoder 5 feature a further improvement in engine load control with
up to 50 kHz clock frequency and noise-optimized motor control, so that coreless
or trace-1 engines in the future at excellent Langsamfahreigenschaf- th silently
approached.
have for the control of lighting and additional functions locomotive sound
decoder 5 numerous outputs and can control when needed RC servos and SUSI
modules.
Each LokSound decoder 5 is also a true multiprocessor protocol decoder with all
four known data formats: In addition to DCC with RailComPlus all understand
the M4 format and automatically log on to modern Märklin® stations. Lower
support for Motorola and Selectrix make use with older centers possible. In
addition, each (N also track!) LokSound 5 can be driven decoder
selstromanlagen on analogue DC and exchange. The desired mode is
automatically detected.
Depending on the center up to 32 functions are possible, which can be assigned
with the unique flexible ESU function mapping arbitrary with special functions.
Three new, individually adjustable
8th
bare brake controller and a two-stage heavy duty simulation bring functions as
additional enthusiasm as the new Zufallsfunk-, with the help of which light effects
can be controlled by chance.
Future standards are no problem: With flash technology, the decoder can always
be brought up to date. For this, the proven LokProgrammer is set once.
To accommodate different sizes and power requirements of the vehicle to meet
witness, LokSound decoders are offered 5 each with different characteristics that
we want to introduce to you.

5.1.1. LokSound 5

The LokSound 5 decoder is designed for locomotives for H0 and trace 0th With
its normalized standard size of 30mmx15.5mm it should find its place in almost
every locomotive. The LokSound decoder 5 is offered with all common
interfaces. Up to 14 function outputs are - depending on the interface - available.
An external power pack can be connected optionally.
Thanks to its extensive light and sound functions as well as its engine power
output of 1.5A he is the perfect "all-round decoder" for your locomotives. The
LokSound decoder 5 is supplied from the factory set with a 11x15mm "sugar
cube" speakers along with a customizable Schallkapsel-.
5.1.2. LokSound micro 5
The LokSound micro 5 is a little powerhouse: Despite its ex- tremely small
dimensions of only 21mm x 10mm it goes next with DCC RailComPlus® also
M4®, Motorola® and Selec- TRIX® and can also (on analogue DC and AC! )
systems are operated.
With up to 9 function outputs you can finally equip from smaller vehicles with
prototypical lighting functions. an ex-