Introduction To The Operating Structure - Esu SwitchPilot 3 51830 Instruction Manual

Introduction to the operating structure

6.2. Introduction to the operating structure
The configuration with the aid of the OLED display and the 3-but-
ton input unit enables you to set all parameters of the SwitchPilot
3 decoder.
All properties are arranged in so-called „panels". A panel fills in
all four lines of the display. The first line displays the name of the
panel, and rows two to four display a maximum of three different
setting options. With the help of the „+" and „-" buttons you can
scroll between the individual panels.
a)
OUTPUT1
b)
Mode : Impulse
d)
Time : 520 ms
Zoom : Disabled
f)
PROG/OK
OUTPUT1
Mode : Impulse
Time : 520 ms
Zoom : Disabled
OUTPUT1
AltFlash
Mode :
Time : 1720 ms
Zoom : Disabled
PROG/OK
OUTPUT1
Mode : AltFlash
1720ms
Time :
Zoom : Disabled
PROG/OK
OUTPUT1
Mode : AltFlash
Time : 1720 ms
Zoom : Disabled
18
c)
ADDRESS MODE
Mode : RCN-213
g) e)
PROG/OK
Figure 14: Control elements of the SwitchPilot 3
a) Name of the panel
b) Name of setting option 1
c) Value of the setting option 1
d) Name of setting option 2
e) Value of the setting option 2
f) Name of the setting option 3
g) Value of the setting option 3
ADDRESS
Switch 1-4: 0001-0004
ADDRESS
Switch 1-4: 0001-0004
OUTPUT STATE
1 2 3 4
CMD ........
PHY ........
a)