Esu LokSound 5 Installation And Operating Instructions Manual page 75

function outputs
• Shunting: The locomotive runs with the speed set in CV 101 overall
•
Braking functions 1 to 3: The braking time is as described in Section
defined as described 10.6.
• Alternative load: The acceleration and deceleration time can be changed as
described in section 10.7.
• Optional load: The acceleration and deceleration time will be changed as
described in Section 10.7.
•
Smoke generator: Pulsed smoke generator (ESU, KM-1, Kiss) advertising the switched
on.
• Sound Fader: When active, the sound is slow "excluded hidden". This is useful
for tunnel simulation.
• disable brake noise: Once active, no braking noise when stopping more plays
• Volume Control: Each time the button is pressed (and How-is released), the
volume will gradually decrease. When pressing full volume is reached again.
Convenient to adjust the volume during operation, without having to program.
• Shift Mode 1 - 6: Sets the global state "Shift Mode 1" to "shift mode 6". This is
possibly used by some sound projects, in order to play certain sounds. In
addition, there is influence of physical function outputs three functions which tion
the radio. This play along with individual lighting effects of the physical outputs.
More details in Section 12.5.
• Firebox: If this condition is set, then the Hel is changed ligkeit a fire rifles LED.
• Dimmer: If this condition is set, then all out- puts darker by about 60% if the
output has set the attribute "dim waste".
• Grade Crossing: Sets for appropriately configured out- puts the "railroad
crossing function" at American Model len.
As with the physical outputs, the logic functions within the mapping line re-
presented by two CVs. The arrangement within the two CVs is as follows:
description
Surname
Control CV N Alternative load On
shunting at
Brake function 1 to
Brake function 2 to
Brake function at 3
Heavy burden on
Clutch function "waltz"
Drive Hold
firebox
Control CV O
dimmer
Grade Crossing
off Acceleration & deceleration times
Smoke generator (ESU, KM-1, Kiss)
sound fader
disable brake noise
Volume Control
Shift Mode 1
Control CV P
Shift Mode 2
Shift Mode 3
Shift Mode 4
Shift Mode 5
Shift Mode 6
Reserved
Reserved
For each output you want to turn on, you have to add the appropriate value for
the controlling CV. Which CV must be written exactly please see again the
summary table on page 70. For the mapping line 1 are the
for example, the CVs 260 (Control CV N), CV 261 (Contrl CV O) and 262 CV (Control CV
P).
value
1
2
4
8th
16
32
64
128
1
2
4
8th
16
32
64
128
1
2
4
8th
16
32
64
128
75