Esu LokSound 5 Installation And Operating Instructions Manual page 24

Installing the decoder
58515 LokSound XL 5 "pin header" 68513
LokSound XL 5 "screw"
Siding left --------------- --------------- right
track connection right track connection
(alternative) ----------- -----
Motor connection right ----------------
U + (positive pole) --------------- + U
(positive pole) ----------------
Motor Connection left ----------------
wheel sensor ----------------
Left motor terminal (alternate) ----------------
Speaker 1 # 1 --------------- Speaker 1
# 2 ----------------
Speaker 1 Volume ----------------
24
GND ----------------
----------------
GND GND ----------------
Figure 8: LokSound XL 5 pin connector - allocation
Servo1 Servo2 Servo3
----------------
AUX11 / Susi Dta / Servo5 (Only header)
---------------Rear light -
---------------- light front
---------------- Sensor input 1
---------------
- AUX1 (Power)
---------------
- AUX2 (Power)
---------------
- AUX 3 (Power)
---------------- Sensor input 2
---------------
- AUX4 (Power)
---------------
- AUX5 (Power)
----------------
Auxiliary Board Power Control (Reserved)
---------------
- AUX6 (Power)
---------------
- U + (+ pole)
---------------- AUX12 / Susi Clk / Servo6 (Only header)
Servo4