Introduction To The Operating Structure - Esu SwitchPilot 3 Instruction Manual

Introduction to the operating structure

6.2. Introduction to the operating structure
The configuration with the aid of the OLED display and the 3-but-
ton input unit enables you to set all parameters of the SwitchPilot
3 Servo decoder.
All properties are arranged in so-called „panels". A panel fills in
all four lines of the display. The first line displays the name of the
panel, and rows two to four display a maximum of three different
setting options. With the help of the „+" and „-" buttons you can
scroll between the individual panels.
a)
SERVO 1 POSITION
b)
Pos A : 24
d)
Pos B : 40
Mode : Digital
f)
PROG/OK
SERVO 1 POSITION
Pos A : 24
Pos B : 40
Mode : Digital
SERVO 1 POSITION
10
Pos A :
Pos B : 40
Mode : Digital
PROG/OK
SERVO 1 POSITION
Pos A : 10
40
Pos B :
Mode : Digital
PROG/OK
SERVO 1 POSITION
Pos A : 10
Pos B : 40
Mode : Digital
16
c)
ADDRESS MODE
Mode : RCN-213
g) e)
PROG/OK
Figure 10: Control elements of the SwitchPilot 3 Servo
a) Name of the panel
b) Name of setting option 1
c) Value of the setting option 1
d) Name of setting option 2
e) Value of the setting option 2
f) Name of the setting option 3
g) Value of the setting option 3
ADDRESS
Switch 1-4: 0001-0004
Switch 5-8: 0005-0008
ADDRESS
Switch 1-4: 0001-0004
Switch 5-8: 0005-0008
OUTPUT STATE
1 2 3 4 5 6 7 8
CMD .».»».».»..».»».
END .».»..».»....»».
a)