Loksound 5 L - Esu LokSound 5 Installation And Operating Instructions Manual

Introduction - The LokSound family
ternes Power pack can optionally be connected. The Mo torausgangsleistung of
0.75A is suitable where space is limited for most all applications.
The LokSound micro 5 is always supplied with a standardized interface Next18-.
Matching each supplied adapter cables provide the connection to the respective
engines.
The LokSound micro decoder 5 is supplied from the factory with a 11x15mm "sugar
cube" speakers along with a customizable Schallkapselset.
5.1.3. LokSound XL 5
The LokSound 5 XL has been designed for the wide track and trace G 1 and
optimized. 41mm its dimensions of 55 x has established itself as the standard for
almost all Track 1 vehicles. The LokSound XL 5 leaves with his motor current
from 5A up to 19 outputs for special functions and connection options for four
additional RC servos little to be desired: The Sophisticated model railroaders
can adapt its vehicles to the smallest detail to the model. While the double
amplifier provides outdoor seating for punchy sounds, including problems due to
dirty rails thanks to the integrated power pack of the past. LokSound 5 XL will be
available in two versions: The version with screw terminals suitable for individual
cabling, while the version with pin headers to almost all Spur1- Model len
Märklin®, KISS®,

5.1.4. LokSound 5 L

The LokSound 5 L finds its place between the 5 and the LokSound LokSound 5
XL. With its dimensions of only 51mmx25.5mm it is recommended not only for
vehicles of nominal size 0, but also for all other vehicles where a LokSound 5 XL
does not fit or necessary. The LokSound 5 L offers a motor starting current of 3A
up to 14 function outputs, as well as the connection for two RC servos. His dual
power amplifier can drive two speakers. Thanks to the now integrated power
packs are dirty rail NEN of the past. The decoder is always supplied with male
connectors and a suitable adapter board.
9