Declaration; Weee Declaration; Important Notes - Read This First - Esu LokSound 5 Installation And Operating Instructions Manual

Important instructions
1. Declaration of Conformity
The manufacturer, ESU GmbH & Co. KG, EDI sonallee 29, D-89231 Neu-Ulm,
hereby declares under sole responsibility responsi- that the product
Product name: LokSound 5, 5 LokSound micro, LokSound 5 L, XL
LokSound 5
Type: 584xx, 588xx, 583xx, 585xx
cal all relevant provisions of Directive Electromagnetic Compatibility (2004/108 /
EC). The following harmonized standards were applied:
EN 55014-1: 2006 + A1: 2009: Electromagnetic Compatibility
- Requirements for household appliances, electric tools and similar apparatus -
Part 1: Emission
EN 55014-2: 1997 + A1: 2001 + A2: 2008: Electromagnetic compatibility -
Requirements for household appliances tools, Elektrowerk- and similar
apparatus - Part 2: Immunity.

2. WEEE Declaration

Disposal of old electrical and electronic equipment (applicable in the European
Union and other European countries with separate ratem collection systems).
This symbol on the product packaging or in the document
mentation means that this product may not be treated as
household waste. Instead, it should be brought to the
appropriate disposal point for recycling of electrical and
electronic boards. If the product is disposed of correctly, you
will help negative environmental influences
prevent sen and health that could be caused by improper disposal. Recycling of
materials contributes to preserve our natural resources. Contact you for more
information regarding recycling of this product, your local city office, your waste
collection service or the shop where you bought this product.
6

3. Important Notes - Read This First

Congratulations on your purchase of an ESU LokSound decoder. This manual
will guide you step by step through the features of the decoder closer. Therefore,
one request: Please read this manual before you start using care- fully. Although
all sound decoders are robustly constructed there an incorrect connection may
lead to destruction of the device. Renounce any "costly" experiments.
• The LokSound is solely intended for use with electrical model-railway
installations. He may only be operated with the described in this manual
components. Any use other than that described in these instructions is not
permitted.
• Any wiring has to be carried out while power is disconnected operation. Make
sure that during the renovation never safe - even accidentally - can enter a
voltage to the locomotive.
• Avoid mechanical force or pressure on the decoder.
• remove the shrink sleeve on the decoder.
Copyright 1998 - 2019 by ESU GmbH & Co KG. Errors, changes that serve technical
advancement, availability and all other rights reserved. Electrical and mechanical measurements
and pictures without guarantee. Any liability for damages and consequential damages caused by
improper use, abnormal operating conditions, unauthorized modifications to u. ä. is excluded.
Not suitable for children un- ter 14 years. Improper use may cause injury. Märklin® and mfx®
are registered trademarks of Gebr. Märklin® und Cie. GmbH, Göppingen. RailCom® is a
registered trademark of Lenz Elektronik GmbH, Giessen. All other trademarks are the property of
their respective owners. ESU GmbH & Co. KG operates a policy of continuous development.
Therefore ESU reserves the right to make on each of the described in the documentation
process-products changes and improvements without notice. Duplications and reproductions of
this documentation in any form without the prior written consent of ESU.