Figure 9-4 Controller Rear Connectors; Table 9-4 Rear Connectors - Motorola iDEN Site Controller System Manual

Chapter 9 Controller
Controller
GPS
BAT
-48V RTN
Figure 9-4 Controller rear connectors
Table 9-4 Rear Connectors
Connector Name
Battery
GPS
T1 / E1
Redundancy
Serial
Parallel
Site Reference Output
X.21
10Base2 Ethernet
10 / 100BaseT Ethernet
9-6
T1/E1
1 2 3 4 REDUND SERIAL
Connector Type
MATE-N-LOK
N
RJ48C
RJ45
RJ45
IEEE1284C
BNC
DB15
BNC
RJ45
SITE REF OUT
PARALLEL 3 2 1
Center pin to -48V battery; right pin
to battery return
GPS antenna
Port 1 to T1/E1 span; port 2 is cabled
but reserved for future use; ports 3
and 4 are reserved for future use.
Receive: Pins 1 & 2
Transmit: Pins 4 & 5
Redundant site controller
No connection
EAS/EAS2 parallel port
BR reference inputs
No connection
Redundant site controller and the
BR's 10Base2 ports; each 10Base2
port is terminated with two 50-ohm
loads. Refer to Chapter 4 for cabinet
to cabinet cabling details.
Redundant site controller
Gen 3 Site Controller System Manual
X.21
10B2-3 10B2-2 10B2-1 10/100B-T
iSC400
102600JNM
Connects to...
68P80801E30-A 5/1/2002