Gen 3 Site Controller System Manual
Recommended Tools,
Equipment, and Parts
Recommended Tools
68P80801E30-A 5/1/2002
Table 3-8 through Table 3-10 list the tools, test equipment and locally
procured parts that are required for the installation procedure. The model
numbers listed are recommended, but equivalent tools and equipment made
by other manufacturers are acceptable.
When selecting tools and equipment, always choose those which have
insulated grips and handles. This helps prevent potential injury resulting
from electrical shock.
Table 3-8 lists the recommended tools for installation. These are not
included as part of the site control equipment and must be procured locally.
All model numbers are Motorola part numbers, unless noted otherwise.
Table 3-8
Recommended tools for installation
Tool
Model/type
banding cutter
n/a
cable crimp tool
TBM5 S
calculator
n/a
cart,
6680387A47
two-wheeled
(luggage type)
circuit cooler
0180334B46
spray
cellular tool kit
RPX4286A
crimping tool
8-pin modular
cable
digital level
24" w/module
Chapter 3 Pre-Installation
Recommended Tools, Equipment, and Parts
Supplier
locally procured
Thomas & Betts
locally procured
Motorola
Motorola
Motorola
locally procured
Pro Smartlevel
Purpose
n/a
crimping lugs on
power cables
n/a
transportation of
tools and test
equipment
low temperature
alarm testing
miscellaneous
tools
customizing T1
connections
antenna downtilt
measurements
3-29