Intercabinet Cabling; Table B-6 Supplied Intercabinet Cabling - Motorola iDEN Site Controller System Manual

Gen 3 Site Controller System Manual

Intercabinet cabling

68P80801E30-A 5/1/2002
Anti-oxidant greases
Any one of the following anti-oxidant greases are recommended for
connections to the positive (+) and negative (-) terminals of the batteries:
No-Ox
I
OxGuard
I
Penetrox
I
Ethernet and alarm cables connecting to the Junction Panels of each cabinet
are supplied with the system. These cables may not be suitable for every site.
It may be necessary to locally fabricate cables for a custom fit. Information
is provided for both supplied cables and custom cables.
Supplied cables
The cables listed in Table B-6 are supplied with the system. The length of
these cables should be sufficient if the considerations outlined in the
Pre-Installation chapter were followed.
Table B-6 Supplied intercabinet cabling
Description
120" long, N-type male to N-type male cable
108" long, BNC male-to-BNC Male, RG400 cable
210" long, 8-pin modular plug cable
186" long, PCCH redundancy control cable
phasing harness
All part numbers are Motorola.
NOTE:
* Per RF Cabinet.
** Per Control Cabinet.
Appendix B Parts & Suppliers
Qty. P/N
3 0112004B24
2* 0112004Z29
1* 3084225N42
1** 3082070X01
1 0182004W04
B-13