Motorola iDEN Site Controller System Manual page 72

Chapter 4 Installation
Cabinet Installation
! WARNING !
4-6
ALWAYS USE TWO OR MORE PERSONS WHENEVER
MOVING A CABINET. A FULLY CONFIGURED
EQUIPMENT CABINET WEIGHS APPROXIMATELY
800 LBS (360 KG).
Carefully move the cabinet into the position indicated by the holes in
6.
the floor.
Adjust and level the cabinet as necessary to align the cabinet mounting
holes with the pre-drilled holes in the floor.
Secure the cabinet to the site floor with the locally procured
7.
mounting hardware.
If required, connect adjacent cabinets to each other using the
8.
ganging hardware (kit no. 0182098V01).
Gen 3 Site Controller System Manual
WARNING
!
68P80801E30-A 5/1/2002