Motorola iDEN Site Controller System Manual page 91

Gen 3 Site Controller System Manual
68P80801E30-A 5/1/2002
Starting at the first RF Cabinet, daisy-chain connect cables (PN
2.
0112004Z29) from the ETHERNET OUT connectors to the
ETHERNET IN connectors on each cabinet junction panel in
accordance with Table 4-15 and Figures 4-9 through 4-12, as
applicable.
Connect a 50Ω BNC Termination (PN 0909906D01) to the
3.
ETHERNET OUT connector on the last RF Cabinet in the
configuration.
Proceed to Alarm Intercabling.
4.
Chapter 4 Installation
Intercabling Connections
4-25