Table 10-3 Eas Connectors - Motorola iDEN Site Controller System Manual

Chapter 10 Environmental Alarm System
EAS Functional Description
10-6

Table 10-3 EAS Connectors

Connector
Battery Mate-N-Lok
GND Ground stud
User Alarm/ 50-pin subminiature-D
Control
System 50-pin subminiature-D
Alarm/
Control
Controller A - 36-pin IEEE 1284
Parallel
Controller A - RJ48
Serial
Controller B - 36-pin IEEE 1284
Parallel
Gen 3 Site Controller System Manual
Type
Provides -48Vdc input power and
ground connector from Equipment
Cabinet Circuit Breaker Panel.
Provides a connection for the
chassis ground.
Provides a connection for the site
alarms through a submini-D cable.
Refer to Chapter 4 - Installation for
pinout details.
All customer provisioned
NOTE:
connections are inputs, except for pins
1, 2, 26 and 3, 4, 28 which are outputs.
Provides a connection for the site
alarms through a submini-D cable.
Refer to Chapter 4 - Installation for
pinout details.
1, 2, 26; 3, 4, 28; & 5, 6, 30 are
outputs.
Provides a parallel link for alarm
commands and responses to Site
Controller A.
Alarm commands and
NOTE:
responses pass through an IEEE 1284
cable.
Not used
Provides a parallel link for alarm
commands and responses to Site
Controller B.
Alarm commands and
NOTE:
responses pass through an IEEE 1284
cable.
Description
68P80801E30-A 5/1/2002