Motorola iDEN Site Controller System Manual page 205

Gen 3 Site Controller System Manual
68P80801E30-A 5/1/2002
Table 11-3 EAS2 Connectors
Connector
Controller B - 36-pin IEEE 1284
Parallel
Control RJ48
RF#l modular
RF#2 modular
RF#3 modular
Chapter 11 Gen 2 Environmental Alarm System
EAS2 Functional Description
Type
Provides a parallel link for alarm
commands and responses to Site
Controller B.
Alarm commands and
NOTE:
responses pass through an IEEE 1284
cable.
Alarm connection for the
Equipment Cabinet Circuit Breaker
Panel. The alarm activates when any
breaker trips or is set to the OFF
position.
Alarm connection for Receiver
Multicouplers (RMCs). The alarm
activates if an RMC power supply
or low noise amplifier fails.
Alarm connection for Receiver
Multicouplers (RMCs). The alarm
activates if an RMC power supply
or low noise amplifier fails.
Alarm connection for Receiver
Multicouplers (RMCs). The alarm
activates if an RMC power supply
or low noise amplifier fails.
Description
11-7