Motorola iDEN Site Controller System Manual page 173

Gen 3 Site Controller System Manual Chapter 8 Software Commands
MMI Commands
The syntax for site controller commands is case sensitive. Each example is
shown in the format that should be entered by the operator.
Some commands require the use of parameters. If input parameters are not
entered, a response is returned identifying the proper syntax for the
command.
A definition describes in detail each command's purpose and function. The
definition is followed by an example of the commands response. Typical
values have been used whenever possible.
Some commands return varying responses (such as available, not available,
unknown, o.k., and alarm). Only one of the possible responses is listed in
each example.
8-3
68P80801E30-A 5/1/2002