Advertisement
K. Drive Axle Bearing Housing
1. Oil drive axle bearing.
2. Install drive axle shim on drive axle.
3.
Oil the o-ring on the bearing housing. Install
bearing housing. Attach wire harness clamp to
lower securing screw.
L. Left Crankcase Cover
1. Oil Delivery Pipe
Oil the threads of the oil delivery pipe union
bolts. Install new washers on each side of each
bolt and tighten bolts.
Oil delivery pipe torque:
2.0~2.2 m-kg (14~16 ft-lbs
2. Install plate washer on oil pump driven gear
shaft. Install starter clutch assembly.
Install cam chain dampers. Install the damper
3.
with the three (3) raised blocks t o the front.
4.
Install cam chain onto drive sprocket. Connect
wire t o each end of cam chain.
5. Install oil pump drive gear. Place a rag between
oil pump drive gear and driven gear t o lock the
gears. Install plate washer and nut. Tighten nut.
gear nut torque:
8.0~12.0 m-kg
I
(58~87
ft-lbs)
Advertisement
