Advertisement
3-3. GEAR OIL REPLACEMENT
NOTE:
See Chapter 4 regarding the inspection of
drained oil. page 110
A. Place an oil pan under the transmission
for the middle gear and under the final
gear case.
B. Remove the middle and/or final gear oil
filler cap(s) and the drain plug(s), and
drain the oil.
WARNING:
When draining or filling, take care not to
allow foreign material to enter the middle
and/or final gear case. Do not allow the
gear oil to contact the tire and wheel.
C. Reinstall the middle and/or final drain
plug(s).
MIDDLE
GEAR
4.3 m-kg (31 ft-lb)
FINAL
GEAR
DRAIN
2.3 m-kg (17 ft-lb)
D. Fill the gear case(s) up to specified level.
Oil Capacity:
Middle Gear Case:
Final Gear Case:
Recommended oil: (See page 9)
E . Reinstall
the
filler
NOTE:
After initial 400 km (250 mi) oil change,
it is normally not necessary to change
middle and final gear oil more frequently
than the indicated service interval of
9,600 km (6,000 mi ).
DRAIN
BOLTTORQUE:
BOLT TORQUE:
375 cc
(13.0 U.S. fl. oz)
300 cc
(10.0 U.S. fl.
cap(s)
securely.
Advertisement
