Yamaha XSR700M 2021 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Motorcycle
  5. XSR700M 2021
  6. Owner's manual

Yamaha XSR700M 2021 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Read this manual carefully before operating this vehicle.
OWNER'S MANUAL
XSR700M
XSR700MC
LIT-11626-34-38
B2G-28199-13

Advertisement

Table of Contents
loading

Related Manuals for Yamaha XSR700M 2021

Summary of Contents for Yamaha XSR700M 2021

  • Page 1 Read this manual carefully before operating this vehicle. OWNER’S MANUAL XSR700M XSR700MC LIT-11626-34-38 B2G-28199-13...
  • Page 2 EAU10045 Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your...
  • Page 3 Yamaha has met these standards without reducing the performance or economy of operation of the motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the recommended maintenance schedules and operating instructions contained within this manual.
  • Page 4 Important manual information EAU10134 Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 5 Important manual information EAU10194 XSR700M / XSR700MC OWNER’S MANUAL ©2021 by Yamaha Motor Corporation, U.S.A. 1st edition, July 2020 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Corporation, U.S.A. is expressly prohibited. Printed in Japan.

  • Page 6: Table Of Contents

    Table of contents Location of important labels... 1-1 For your safety – pre-operation Checking the brake lever free checks ..........5-1 play..........7-20 Safety information......2-1 Brake light switches ..... 7-20 Operation and important riding Checking the front and rear Description ........3-1 points ..........6-1 brake pads ........
  • Page 7 Diagnostic connector ....10-3 Vehicle data recording ....10-3 Reporting safety defects ....10-4 Motorcycle noise regulation ..10-5 Maintenance record ......10-6 YAMAHA MOTOR CORPORATION, U.S.A. 2020 AND LATER MODEL STREET & DUAL-PURPOSE MOTORCYCLE LIMITED WARRANTY .......10-8 YAMAHA EXTENDED SERVICE (Y.E.S.) ........10-10 Index ..........11-1...

  • Page 8: Location Of Important Labels

    Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, a replacement label is available from your Yamaha dealer.
  • Page 9 Location of important labels 2 California only WARNING VACUUM HOSE ROUTING BEFORE YOU OPERATE THIS VEHICLE, READ PRESS. SENSOR THE OWNER’S MANUAL AND ALL LABELS. ALWAYS WEAR AN APPROVED MOTORCYCLE HELMET, eye protection, and protective clothing. 1TP-2118K-A1 3 California only INTAKE MANIFOLD 34B-21684-00 TIRE INFORMATION...

  • Page 10: Safety Information

    Safety information  Never operate a motorcycle with- pears to be very effective in reduc- EAU1028C out proper training or instruction. ing the chance of this type of Take a training course. Beginners accident. Be a Responsible Owner should receive training from a cer- Therefore: As the vehicle’s owner, you are re- tified instructor.
  • Page 11 Safety information  Many accidents involve inexperi- • Always signal before turning or Protective Apparel enced operators. In fact, many op- changing lanes. Make sure that The majority of fatalities from motorcy- erators who have been involved in other motorists can see you. cle accidents are the result of head in- ...
  • Page 12 Safety information  Do not run engine outdoors where Avoid Carbon Monoxide Poisoning When loading within this weight limit, All engine exhaust contains carbon engine exhaust can be drawn into keep the following in mind:  Cargo and accessory weight monoxide, a deadly gas.
  • Page 13 Yamaha accessories, which are avail- performed to your vehicle that change lightweight as possible and able only from a Yamaha dealer, have any of the vehicle’s design or operation should be kept to a minimum. been designed, tested, and approved characteristics can put you and others •...
  • Page 14 Safety information  Remove all loose items from the operator and may limit control ability, therefore, such accesso- motorcycle.  Check that the fuel cock (if ries are not recommended.  Use caution when adding electri- equipped) is in the off position and cal accessories.

  • Page 15: Description

    Description EAU10411 Left view 8 7 6 1. Seat lock (page 4-16) 2. Tool kit (page 7-2) 3. Shift pedal (page 4-11) 4. Engine oil filler cap (page 7-10) 5. Engine oil drain bolt (page 7-10) 6. Engine oil level check window (page 7-10) 7.

  • Page 16: Right View

    Description EAU10421 Right view 1. Fuses (page 7-32) 2. Battery (page 7-30) 3. Spring preload adjuster (page 4-17) 4. Fuel tank cap (page 4-13) 5. Headlight (page 7-34) 6. Brake pedal (page 4-12) 7. Rear brake fluid reservoir (page 7-21)

  • Page 17: Controls And Instruments

    Description EAU10431 Controls and instruments 1. Clutch lever (page 4-11) 2. Left handlebar switches (page 4-9) 3. Main switch/steering lock (page 4-1) 4. Multi-function meter unit (page 4-4) 5. Front brake fluid reservoir (page 7-21) 6. Right handlebar switches (page 4-9) 7.

  • Page 18: Instrument And Control Functions

    Instrument and control functions To lock the steering EAU10462 EAU10662 Main switch/steering lock All electrical systems are off. The key can be removed. EWA10062 WARNING Never turn the key to “OFF” or “LOCK” while the vehicle is moving. Otherwise the electrical systems will be switched off, which may result in loss of control or an accident.

  • Page 19: Indicator Lights And Warning Lights

    The hazard lights and turn signal lights 7. High beam indicator light “ ” ed. Otherwise, have a Yamaha dealer can be turned on, but all other electri- 8. Right turn signal indicator light “ ”...
  • Page 20 Engine trouble warning light “ ” ABS warning light “ ” stop the engine and have a Yamaha This warning light comes on if a prob- This warning light comes on when the dealer check the vehicle. lem is detected in the electrical circuit vehicle is first turned on, and goes off monitoring the engine.

  • Page 21: Multi-Function Meter Unit

    Instrument and control functions multi-function meter unit Tachometer EAU83022 Multi-function meter unit equipped with the following:  speedometer  tachometer  fuel meter  eco indicator  transmission gear display  multi-function display EWA12423 WARNING ZAUM1330 Be sure to stop the vehicle before ZAUM11328 1.
  • Page 22 Instrument and control functions Fuel meter Eco indicator Transmission gear display ZAUM1331 1. Frame 1. Eco indicator “ECO” 1. Neutral indicator light “ ” 2. Fuel meter 2. Transmission gear display The eco indicator comes on when the The fuel meter indicates the amount of The transmission gear display shows vehicle is being operated in an environ- fuel in the fuel tank.
  • Page 23 Instrument and control functions Multi-function display Navigating the multi-function dis- Odometer and tripmeters play The odometer shows the total distance Push button B to change the display traveled by the vehicle. between the odometer “ODO”, tripme- The tripmeters show the distance trav- ters “TRIP 1”...
  • Page 24 Instrument and control functions AVE_ _._ MPG → _ _ °F → Air_ _ °F → This function calculates the fuel con- Average fuel consumption Clock → ODO → TRIP 1 → TRIP 2 → sumption under current riding condi- TRIP F tions.
  • Page 25 Instrument and control functions age fuel consumption, select it by load. If the message “HI” flashes, stop Clock pushing button B. The average fuel the vehicle, then stop the engine, and consumption display will flash for a few let it cool. (See page 7-39.) seconds.

  • Page 26: Handlebar Switches

    3. Turn the key to “ON” and continue note the code number and have a pushing button B until the display Yamaha dealer check the vehicle. switches to the brightness control ECA11591 mode. NOTICE 4.
  • Page 27 Instrument and control functions EAU12352 EAU68270 ECA10062 Pass switch “ ” Start/Engine stop switch “ ” NOTICE Press this switch to flash the headlight. To crank the engine with the starter, Do not use the hazard lights for an set this switch to “ ”, and then slide extended length of time with the en- the switch toward “...

  • Page 28: Clutch Lever

    Instrument and control functions EAU12822 EAU12876 EAU26827 Clutch lever Shift pedal Brake lever ZAUM1342 1. Clutch lever 1. Shift pedal 1. Brake lever 2. Distance The clutch lever is located on the left The shift pedal is located on the left 3.

  • Page 29: Brake Pedal

    EAU12944 EAU63040 Brake pedal  The ABS performs a self-diagno- The Yamaha ABS (Anti-lock Brake sis test each time the vehicle first System) features a dual electronic con- starts off after the key is turned to trol system, which acts on the front and “ON”...

  • Page 30: Fuel Tank Cap

    Instrument and control functions EAU13076 Fuel tank cap The fuel tank cap cannot be closed un- less the key is in the lock. In addition, the key cannot be removed if the cap is not properly closed and locked. EWA11092 WARNING Make sure that the fuel tank cap is properly closed after filling fuel.

  • Page 31: Fuel

    EWA10882 WARNING EAU86100 Gasoline and gasoline vapors are Your Yamaha engine was designed to extremely flammable. To avoid fires use regular unleaded gasoline. Con- and explosions and to reduce the firm the pump octane number [(R+M)/2 risk of injury when refueling, follow 1.

  • Page 32: Fuel Tank Breather Hose And Overflow Hose

     Make sure that the end of each ohol containing methanol is EAU86250 Fuel tank breather hose and recommended by Yamaha because it hose is not blocked, and clean if overflow hose can cause damage to the fuel system necessary.

  • Page 33: Catalytic Converter

    Instrument and control functions EAU13435 EAU83140 Catalytic converter Seat The exhaust system contains catalytic converter(s) to reduce harmful exhaust To remove the seat emissions. Insert the key into the seat lock, turn it counterclockwise, and then pull the EWA10863 WARNING seat off.

  • Page 34: Adjusting The Shock Absorber Assembly

    Spring preload setting: sembly yourself. Take the shock Turn the adjusting ring in direction (b) Minimum (soft): absorber assembly to a Yamaha to decrease the spring preload. dealer for any service.  Align the appropriate notch in the Standard:...

  • Page 35: Auxiliary Dc Connector

    EAU70641 EAU15306 Auxiliary DC connector Sidestand Yamaha dealer repair it if it does not This vehicle is equipped with an auxil- The sidestand is located on the left function properly. iary DC connector. Consult your side of the frame.

  • Page 36: Ignition Circuit Cut-Off System

    Instrument and control functions EAU44895 Ignition circuit cut-off system This system prevents in-gear engine starts unless the clutch lever is pulled and the sidestand is up. Also, it will stop the running engine should the sidestand be lowered while the trans- mission is in gear.
  • Page 37 The neutral switch may not be working. 6. Move the sidestand up. The motorcycle should not be ridden until 7. Pull the clutch lever. checked by a Yamaha dealer. 8. Shift transmission into gear. 9. Move the sidestand down. Does the engine stall? The sidestand switch may not be working.

  • Page 38: For Your Safety - Pre-Operation Checks

    • If necessary, add recommended coolant to specified level. 7-14 • Check cooling system for leakage. • Check operation. • If soft or spongy, have Yamaha dealer bleed hydraulic system. • Check brake pads for wear. Front brake • Replace if necessary.
  • Page 39 • Make sure that operation is smooth. • Check throttle grip free play. Throttle grip 7-16, 7-26 • If necessary, have Yamaha dealer adjust throttle grip free play and lubricate ca- ble and grip housing. • Make sure that operation is smooth. Control cables 7-25 •...
  • Page 40 • Tighten if necessary. Instruments, lights, signals • Check operation. — and switches • Correct if necessary. • Check operation of ignition circuit cut-off system. Sidestand switch 4-18 • If system is not working correctly, have Yamaha dealer check vehicle.

  • Page 41: Operation And Important Riding Points

    To start the engine with  a lean angle sensor. This sensor understand, ask your Yamaha dealer. the transmission in gear, the sidestand stops the engine in case of a turn- EWA10272 must be up and the clutch lever pulled.

  • Page 42: Shifting

    If a warning or indicator light does not work as described above, have a the neutral position, do not Yamaha dealer check the vehicle. coast for long periods of time with the engine off, and do not 3. Shift the transmission into neutral.
  • Page 43 Operation and important riding points 4. At the recommended shift points clutch lever in, use the brakes to EAU64150 Recommended shift points shown in the following table, close slow the motorcycle, and continue The recommended shift points during the throttle, and at the same time, to downshift as necessary.

  • Page 44: Engine Break-In

    Yamaha dealer check the vehi-  Do not park on a slope or on soft During this period, prolonged full-throt- cle.

  • Page 45: Periodic Maintenance And Adjustment

    To avoid possible burns, let tivities incorrectly may increase brake components cool before your risk of injury or death during touching them. service or while using the vehicle. If you are not familiar with vehicle ser- vice, have a Yamaha dealer perform service.

  • Page 46: Tool Kit

    However, a torque wrench and other tools are necessary to perform certain maintenance work correctly. If you do not have the tools or experi- ence required for a particular job, have your Yamaha dealer perform it for you.

  • Page 47: Periodic Maintenance Chart For The Emission Control System

     From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months.  Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the ser- vice.

  • Page 48: General Maintenance And Lubrication Chart

    24 months 30 months • Perform dynamic inspection us- Diagnostic system √ √ √ √ √ √ ing Yamaha diagnostic tool. check • Check the error codes. Air filter element • Replace. Every 24000 mi (37000 km) √ √ √ √...
  • Page 49 Periodic maintenance and adjustment INITIAL ODOMETER READINGS 600 mi 4000 mi 8000 mi 12000 mi 16000 mi 20000 mi ITEM ROUTINE (1000 km) (7000 km) (13000 km) (19000 km) (25000 km) (31000 km) 1 month 6 months 12 months 18 months 24 months 30 months •...
  • Page 50 Periodic maintenance and adjustment INITIAL ODOMETER READINGS 600 mi 4000 mi 8000 mi 12000 mi 16000 mi 20000 mi ITEM ROUTINE (1000 km) (7000 km) (13000 km) (19000 km) (25000 km) (31000 km) 1 month 6 months 12 months 18 months 24 months 30 months Brake pedal pivot...
  • Page 51 • Change coolant. Front and rear √ √ √ √ √ √ 28 * • Check operation. brake switches • Apply Yamaha cable lubricant or √ √ √ √ √ √ 29 * Control cables other suitable cable lubricant thoroughly.
  • Page 52 Periodic maintenance and adjustment • Every two years replace the internal components of the brake master cylinders and calipers, and change the brake fluid. • Replace the brake hoses every four years or sooner if cracked or damaged.

  • Page 53: Checking The Spark Plugs

    1/2 turn past finger tight. However, the Yamaha dealer. Since heat and depos- with a wire thickness gauge and, if spark plug should be tightened to the its will cause any spark plug to slowly necessary, adjusted to specification.

  • Page 54: Canister (For California)

    Periodic maintenance and adjustment  Make sure that the canister EAU76882 EAU60474 Canister (for california) Engine oil and oil filter car- breather hose is routed through tridge the clamp. The engine oil level should be checked  Make sure that the paint mark on before each ride.
  • Page 55 Periodic maintenance and adjustment 1. Engine oil filler cap 1. Engine oil filler cap 1. Engine oil drain bolt 2. Engine oil level check window 2. O-ring 2. Gasket 3. Maximum level mark 4. Minimum level mark To change the engine oil (with or without oil filter cartridge replace- Skip steps 5–7 if the oil filter cartridge 4.
  • Page 56 Periodic maintenance and adjustment Recommended engine oil: See page 9-1. An oil filter wrench is available at a Oil quantity: Yamaha dealer. Oil change: 2.30 L (2.43 US qt, 2.02 Imp.qt) 6. Apply a thin coat of clean engine With oil filter removal: oil to the O-ring of the new oil filter 2.60 L (2.75 US qt, 2.29 Imp.qt)

  • Page 57: Why Yamalube

    We form gine off and have a Yamaha dealer teams of specialists in the fields of me- check the vehicle. chanical engineering, chemistry, elec- 13.

  • Page 58: Coolant

    2. Maximum level mark soft tap water instead. Do not 3. Minimum level mark If genuine Yamaha coolant is not avail- use hard water or salt water 3. If the coolant is at or below the mi- able, use an ethylene glycol antifreeze since it is harmful to the engine.

  • Page 59: Replacing The Air Filter Element And Cleaning The Check Hose

    Have a periodic maintenance and lubrication Yamaha dealer change the coolant. chart. Have a Yamaha dealer replace WARNING! Never attempt to remove the air filter element more frequently if the radiator cap when the engine is you are riding in unusually wet or dusty hot.

  • Page 60: Checking The Throttle Grip Free Play

    3.0–5.0 mm (0.12–0.20 in) proper tire pressure may cause se- Periodically check the throttle grip free vere injury or death from loss of play and, if necessary, have a Yamaha control.  The tire air pressure must be dealer adjust it.
  • Page 61 Never overload your vehicle. Opera- has a nail or glass fragments in it, or if characteristics. tion of an overloaded vehicle could the sidewall is cracked, have a Yamaha cause an accident. dealer replace the tire immediately. Minimum tire tread depth (front and rear): 1.0 mm (0.04 in)
  • Page 62 2. Tire air valve core ed below have been approved for this surfaces until they have been 3. Tire air valve cap with seal model by Yamaha. “broken in”. Therefore, it is ad- This model is equipped with tubeless visable before doing any high- Front tire: tires and rubber tire air valves.

  • Page 63: Cast Wheels

    2. Loosen the locknut at the crank- ride. If any damage is found, have case. a Yamaha dealer replace the wheel. Do not attempt even the smallest repair to the wheel. A de- formed or cracked wheel must be replaced.

  • Page 64: Checking The Brake Lever Free Play

    Yamaha dealer. 1. No brake lever free play There should be no free play at the brake lever end. If there is free play, have a Yamaha dealer inspect the brake system. EWA14212 WARNING A soft or spongy feeling in the brake lever can indicate the presence of air in the hydraulic system.

  • Page 65: Checking The Front And Rear Brake Pads

    EAU22393 EAU40262 Checking the front and rear Checking the brake fluid level Yamaha dealer replace the brake pads brake pads Before riding, check that the brake fluid as a set. is above the minimum level mark.
  • Page 66  Use only the specified brake flu- Rear brake fluid level goes down suddenly, have a id; otherwise, the rubber seals Yamaha dealer check the cause before may deteriorate, causing leak- further riding. age.  Refill with the same type of brake fluid.

  • Page 67: Changing The Brake Fluid

    EAU22734 EAU22762 Changing the brake fluid Drive chain slack Have a Yamaha dealer change the The drive chain slack should be brake fluid every 2 years. In addition, checked before each ride and adjusted have the seals of the master cylinders if necessary.
  • Page 68 3. Tighten the axle nut, and then EAU59921 To adjust the drive chain slack tighten the locknuts to the speci- Consult a Yamaha dealer before ad- fied torques. justing the drive chain slack. 1. Loosen the locknut at each end of...

  • Page 69: Cleaning And Lubricating The Drive Chain

    If a cable is wet areas. Service the drive chain as damaged or does not move smoothly, follows. have a Yamaha dealer check or re- place it. WARNING! Damage to the ECA10584 NOTICE outer housing of cables may result...

  • Page 70: Checking And Lubricating The Throttle Grip And Cable

    In pedals should be checked before each addition, the cable should be lubricat- ride, and the pedal pivots should be lu- ed by a Yamaha dealer at the intervals bricated if necessary. specified in the periodic maintenance Brake pedal chart.

  • Page 71: Brake And Clutch Levers

    EWA10732 Clutch lever WARNING If the sidestand does not move up and down smoothly, have a Yamaha dealer check or repair it. Otherwise, the sidestand could contact the ground and distract the operator, re- sulting in a possible loss of control.

  • Page 72: Lubricating The Rear Suspension

    The swingarm pivots must be lubricat- ce and hold it in an upright posi- sion must be lubricated by a Yamaha ed by a Yamaha dealer at the intervals tion. WARNING! To avoid injury, dealer at the intervals specified in the...

  • Page 73: Checking The Steering

    [EWA10752] the periodic maintenance and lubrica- 2. Hold the lower ends of the front have a Yamaha dealer check or re- tion chart. If there is play in the wheel fork legs and try to move them for- pair it.

  • Page 74: Battery

    Periodic maintenance and adjustment  Batteries produce explosive hy- 3. Remove the diagnostic connector EAUM3751 Battery drogen gas. Therefore, keep by pulling it upward. This model is equipped with a VRLA sparks, flames, cigarettes, etc., 4. Remove the battery cover by re- (Valve Regulated Lead Acid) battery.
  • Page 75 6. Install the diagnostic connector by To charge the battery switch off, then disconnect the pushing it downward. Have a Yamaha dealer charge the bat- negative lead before discon- 7. Install the seat holder by installing tery as soon as possible if it seems to necting the positive lead.

  • Page 76: Replacing The Fuses

    Periodic maintenance and adjustment EAUM3672 Replacing the fuses The main fuse and the fuse boxes are located under the seat. To access the fuses 1. Remove the seat. (See page 4-16.) 2. Remove the seat holder by remov- ing the bolts. ZAUM1380 1.
  • Page 77 1 2 3 4 5 possibly a fire. 4. If the fuse immediately blows [EWA15132] again, have a Yamaha dealer Specified fuses: check the electrical system. Main fuse: 5. After the fuse is changed, place 30.0 A...

  • Page 78: Replacing The Headlight Bulb

    Periodic maintenance and adjustment EAU34387 Replacing the headlight bulb This model is equipped with a halogen bulb headlight. If the headlight bulb burns out, replace it as follows. ECA26690 NOTICE  Do not touch the glass part of the headlight bulb. Otherwise the luminosity and the life of the 1.

  • Page 79: Tail/Brake Light

    Yamaha dealer check it. 6. Install the headlight unit by install- ing the bolts. 7. Have a Yamaha dealer adjust the headlight beam if necessary. 1. Turn signal light unit 2. Screw 2. Remove the turn signal light bulb socket (together with the bulb) by turning it counterclockwise.

  • Page 80: License Plate Light

    License plate light installing the screw. NOTICE: Do If the license plate light does not come not overtighten the screw, oth- on, have a Yamaha dealer check the erwise the lens may break. electrical circuit or replace the bulb. [ECA11192] 1.

  • Page 81: Supporting The Motorcycle

    1. Maintenance stand (example) self. However, should your motorcycle Since this model is not equipped with a require any repair, take it to a Yamaha centerstand, use maintenance stands dealer, whose skilled technicians have when removing the front or rear wheel...

  • Page 82: Troubleshooting Chart

    Remove the spark plug and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the compression. 4. Compression The engine does not start. There is compression.
  • Page 83 Start the engine. If the engine overheats again, have a The coolant level Yamaha dealer check and repair the cooling system. is OK. If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended cool- ant as soon as possible.

  • Page 84: Motorcycle Care And Storage

    Be  high-pressure washers sure to consult a Yamaha dealer for of many components. Washing, clean- steam-jet cleaners. Excessive advice on what products to use be- ing, and polishing will also give you a water pressure may cause wa- fore cleaning the vehicle.
  • Page 85 Motorcycle care and storage chemicals such as, solvents, Washing windshield. Additionally, some gasoline, rust removers, brake 1. Rinse off any degreaser and spray cleaning compounds for plastic fluid, or antifreeze, etc. down the vehicle with a garden may scratch the windshield, so hose.

  • Page 86: Storage

    Motorcycle care and storage ply silicone or oil spray to seats, ECA26320 EAU84141 Storage NOTICE hand grips, rubber foot pegs or Always store the vehicle in a cool, dry  Do not apply wax to rubber or tire treads. Otherwise these place.
  • Page 87 Motorcycle care and storage 1. Make all necessary repairs and a. Remove the spark plug cap 8. Check and correct the tire air perform any outstanding mainte- and spark plug. pressure, and then lift the vehicle nance. b. Pour a teaspoonful of engine so that all wheels are off the 2.

  • Page 88: Specifications

    Specifications Dimensions: Starting system: Coolant quantity: Electric starter Overall length: Coolant reservoir (up to the maximum level Engine oil: 2075 mm (81.7 in) mark): Overall width: Recommended brand: 0.25 L (0.26 US qt, 0.22 Imp.qt) 820 mm (32.3 in) Radiator (including all routes): Overall height: 1.60 L (1.69 US qt, 1.41 Imp.qt) Fuel:...
  • Page 89 Specifications Front tire: Battery: Type: Model: Tubeless YTZ10S Size: Voltage, capacity: 120/70 R 17M/C(58V) 12 V, 8.6 Ah (10 HR) Manufacturer/model: Headlight: PIRELLI/PHANTOM SPORTSCOMP Bulb type: Rear tire: Halogen bulb Type: Bulb wattage: Tubeless Headlight: Size: H4, 60.0 W/55.0 W 180/55 R 17M/C(73V) Brake/tail light: Manufacturer/model:...

  • Page 90: Consumer Information

    EAU26401 Vehicle identification number ed when registering the vehicle with the authorities in your area and when EAU26442 Engine serial number ordering spare parts from a Yamaha dealer. VEHICLE IDENTIFICATION NUMBER: ZAUM1358 1. Vehicle identification number ENGINE SERIAL NUMBER: The vehicle identification number is 1.
  • Page 91 This information will it for reference when ordering a new illustration. This label shows specifica- be needed when ordering spare parts key. tions related to exhaust emissions as from a Yamaha dealer. required by federal law, state law and Environment Canada. 10-2...

  • Page 92: Diagnostic Connector

    Consumer information Yamaha will not disclose this data to a EAU69910 EAU90250 Diagnostic connector Vehicle data recording third party except in the following cas- This model’s ECU stores certain vehi- es. In addition, Yamaha may provide cle data to assist in the diagnosis of...

  • Page 93: Reporting Safety Defects

    If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immedi- ately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Yamaha Motor Corporation, U.S.A. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.

  • Page 94: Motorcycle Noise Regulation

    Consumer information EAU26561 Motorcycle noise regulation TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED: Federal law prohibits the following acts or the causing thereof: (1) The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement of any device or element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use or (2) the use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.

  • Page 95: Maintenance Record

    Consumer information EAU26633 Maintenance record Copies of work orders and/or receipts for parts purchased and installed on your vehicle will be required to document that maintenance has been completed in accordance with the emissions warranty. The chart below is printed only as a reminder that maintenance work is required.
  • Page 96 Consumer information Maintenance Date of Servicing dealer Mileage Remarks interval service name and address 36000 mi (55000 km) or 54 months 40000 mi (61000 km) or 60 months 10-7...

  • Page 97: Yamaha Motor

    Consumer information EAU61803 YAMAHA MOTOR CORPORATION, U.S.A. 2020 AND LATER MODEL STREET & DUAL-PURPOSE MOTORCYCLE LIMITED WARRANTY Yamaha Motor Corporation, U.S.A. hereby warrants that Give notice to an authorized Yamaha motorcycle ENGINE each new Yamaha motorcycle purchased from an DISPLACEMENT...

  • Page 98: Warranty

    CUSTOMER SERVICE What costs are my responsibility during the warranty period? If your machine requires warranty service, you must take it to any authorized Yamaha The customer’s responsibility includes all costs of normal maintenance services, motorcycle dealer within the continental United States. Be sure to bring your warranty non-warranty repairs, accident and collision damages, and oil, oil filters, air filters, registration card or other valid proof of the original date of purchase.

  • Page 99: Yamaha Extended Service (Y.e.s.)

    This excellent Y.E.S. plan coverage is only available to warranty. See the sample contract at your Yamaha Yamaha owners like you, and only while your Yamaha is still dealer to see how comforting uninterrupted factory- within the Yamaha Limited Warranty period. So visit your backed protection can be.
  • Page 100 TRIP coverage right away, and you’ll rest easy knowing you’ll have strong factory-backed protection even after your Yamaha Limited Warranty expires. A special note: If visiting your dealer isn’t convenient, contact Yamaha with your VIN number and we’ll be happy to help you get the YAMAHA EXTENDED SERVICE Y.E.S.

  • Page 101: Index

    Index Maintenance record......10-6 Matte color, caution........ 8-1 ABS............4-12 Engine break-in ........6-4 Model label ........... 10-2 ABS warning light ........4-3 Engine oil and oil filter cartridge... 7-10 Multi-function meter unit ......4-4 Air filter element and check hose, Engine overheating ......
  • Page 102 Index Throttle grip and cable, checking and lubricating...........7-26 Throttle grip free play, checking ...7-16 Tires ............7-16 Tool kit ............7-2 Troubleshooting ........7-37 Troubleshooting chart......7-38 Turn signal indicator lights......4-2 Turn signal light bulb, replacing....7-35 Turn signal switch .........4-10 Valve clearance........7-16 Vehicle Emission Control Information label ............10-2 Vehicle identification number ....10-1 Warranty, extended ......10-10...
  • Page 103 Yamalube – Take care of your Yamaha with legendary Yamalube oils, lubricants, and care products. They’re formulated and approved by the toughest judges we know: the Yamaha engineering teams that know your Yamaha from the inside out.
  • Page 104 PRINTED IN JAPAN 2020.08-0.3×1 CR (E)

This manual is also suitable for:

Xsr700mc 2021

Table of Contents