Advertisement
1. Loosen each bolt
unnumbered bolt. Continue by loosening the
highest numbered bolts first. The numbers of
the bolts are cast in the cases. Numbers 24~
15 are on the top case. Numbers 14-1 are on
the bottom case.
Remove all crankcase holding bolts. Use a soft
2.
rubber hammer to carefully separate the
crankcases. The crankshaft and transmission
shafts should stay in the bottom crankcase.
3.
Remove crankshaft. Note location of special
main bearing ('A' bearing). This is a combina-
tion side thrust bearing and main bearing.
P. Transmission Disassembly
1.
Remove middle driven gear.
#
turn, starting with the
,
1
2. Remove shift fork guide bar circlip (E-clip).
Remove guide bar.
3. Remove main axle assembly.
4. Remove circlip (E-clip) holding shift fork
guide two
5. Remove guide bar, washer and both shift forks.
Advertisement
