Advertisement
2. Install shift lever 2. The dot on shift lever 2
must align with the dot on the shaft.
3. Shift transmission into second gear. The line
on the shift cam must align with the line on
shift lever 2. I f not aligned, adjust by turning
the adjusting screw.
F. Kick Starter Assembly
1. Install kick
gear
The kick clip (special clip) must be positioned
in the groove.
2. Install kick gear holder.
3. Install kick gear 4, shim, and circlip.
5 assembly into crankcases.
4. Install shim and bearing onto idler shaft. Oil
the bearing.
Install the kick starter shaft and kick idle gear
5.
assembly together. Use the kick crank to help
install the kick shaft assembly. Install the
torsion spring on the boss. Install the washer
and circlip on the kick shaft. Check the move-
ment of the kick shaft with the kick crank.
Remove the kick crank.
G. Clutch and Primary Drive
1. Install clutch spacer, plate washer, and clutch
boss. Install the spring washer and lock nut.
Use the clutch holding tool and special 32mm
deep socket (special tool) to tighten the clutch
nut.
Advertisement
