Advertisement
c. Be careful that water or other contamination
does not enter the master cylinder when re-
filling. Water will significantly lower the
boiling point and may result in vapor lock.
D. Wheels And Tires
1. Checking the aluminum wheels.
a. Check for cracks, bends or warpage of the
wheels. If a wheel is deformed or cracked, it
must be replaced.
NOTE: These aluminum wheels are NOT de-
signed for use with tubeless tires.
b. Raise the wheel off the ground. Spin.
Rim runout limits:
Vertical
Lateral
I
,
2mm (0.08 in.)
-
- 1
m m ( 0.04 in.)
2. Front axle
a. Check axle nuts.
Front axle nut torque:
Rear axle nut torque:
b. Check axle holder nuts (right side).
I
Front axle holder nuts:
1.3
-
CAUTION: First tighten the nut on the front
the axle holder, and then tighten the
end
of
nut on the rear end.
Rear axle pinch bolt:
0.45
-
3. Tires
Tire pressure
,
1.8 kg/cm!
Front
(26
psi)
Rear
2.0 kg/cm! | Normal riding
(28 psi)
7.0~10.0 m-kg
(50~72 ft-lb)
12~18 m-kg
(87~130 ft-lb)
2.3 m-kg (9-17 ft-lbs)
0.75 m-kg (3-5 ft-lbs)
I
1
I
Advertisement
