Advertisement
Side Cover, Air Cleaner Case
D.
1.
Remove left and right side covers.
DOHC
2.
Remove screws holding intake silencers (left
and right). Remove intake silencers.
3. Loosen clamps holding carburetors t o air clean-
er case and intake manifolds. Loosen breather
hose clamp a t a i r cleaner case junction.
Remove bolts holding air cleaner case to
4.
frame. Note ground wire connection on left
frame bracket.
5.
Pull air cleaner case t o the rear. Remove clutch
cable from holder attached t o the left carbu-
retor. L i f t carburetors back and to the left.
Remove throttle cable from carburetors.
6.
Remove air cleaner case,
E.
Wiring and Cables
1. Pull back rubber cover on clutch adjustor
engine. Disconnect clutch cable.
a t
Advertisement
