Advertisement
2.
Remove neutral light wire. Remove breaker
assembly wiring harness from clamps on crank-
case. Remove three (3) breaker plate holding
screws and remove breaker assembly.
3.
Remove governor assembly.
J.
Electric Starter Removal
Remove L.H. crankcase cover.
2. Remove idler gear 1 and shaft.
3.
a
Place
folded rag between the kick idler
gear two (2) and pump drive gear as shown.
Remove pump drive gear nut and gear. Re-
move cam chain.
4.
Remove starter clutch assembly
5. Remove oil delivery pipe,
Advertisement
