Yamaha XS750 Manual page 33

C. Piston Removal
1. Mark each piston t o aid in reassembly.
2. Place
a clean towel or rag into the crankcase
t o keep circlips and material from falling into
the engine.
3. Remove piston pin clips, piston pins, and
pistons.
D. Generator
1. Remove generator wiring harness from mount-
ing clips. Remove oil pressure warning switch
wire.
2. Remove kick crank
3. Remove generator cover.
4. Remove the bolt, plate washer and lock washer
from the rotor. Use the rotor holding tool and
bolt (special tools) t o remove rotor.
5. Remove the crankcase cover bolts and remove
the cover.
6. Remove oil pressure warning switch.
E. Bearing Housing
Remove four (4) bearing housing securing bolts and
remove bearing housing.