Advertisement
N. Oil Pump Removal and Disassembly
1. Remove strainer cover.
2. Remove oil pump.
3. Remove oil pump driven gear.
4.
Remove oil pump cover and rotor assembly.
5. Remove pressure relief valve: remove circlip,
washer, spring, and plunger.
6.
Remove oil pump check valve: remove cir-
clip, plug, spring, and plunger.
O. Crankcase Disassembly
bolt. This bolt is located near the transmission
drive axle, as shown. This bolt must be located
before proceeding with crankcase disassembly.
Advertisement
