Advertisement
5-1. Removal of Components
It is normally not necessary to remove the
engine t o remove the Middle Gear Case.
A. Drive Shaft Joint
(1)
rubber boot from drive shaft
Pull
coupling t o expose four
Remove 4 coupling bolts;
(2)
NOTE:
Use the rear brake t o
shaft.
B.
Final Gear Removal
( 1 ) Remove rear axle and left shock
absorber.
Remove rear wheel. See
XS750D
Service Manual for procedures.
4
Remove
nuts holding Fi n a l Drive unit
(2)
t o swing arm.
NOTE:
Keep the Final Drive pinion bearing
housing attached t o the Final Drive
assembly. I t may tend to separate
from the Final Gear (for Type
Gear only).
(3)
Remove the Final Drive Gear assembly.
REMOVAL OF COMPONENTS
(4) bolts.
the drive
lock
1
Final
C. Middle Gear Removal
(7)
Remove seven
bolts, Remove the meddle gear case, drive
cam and spring.
1. Drive cam
D. Drive Shaft
Remove drive shaft as shown.
middle gear case securing
2 .
Sprlng
Advertisement
