Belt Case Air Cleaner - Honda SH300 2006 Manual

MAINTENANCE

BELT CASE AIR CLEANER

Remove the three socket bolts and screw.
Remove the belt case air cleaner housing from the
left crankcase cover.
Release the three tabs of the air cleaner base cover
from the slots of the air cleaner base.
Remove the air cleaner base cover from the air
cleaner base.
Check that the O-ring of the air cleaner base cover is
in good condition, replace if necessary.
Remove the air cleaner element from the base core.
Wash the element in non-flammable or high flash
Do not apply oil to
point solvent.
the element.
Squeeze out the solvent and let it dry thoroughly,
then install it onto the base core.
Install the belt case air cleaner housing in the
reverse order of removal.
TORQUE:
Belt case air cleaner housing socket bolt:
10 N·m (1.0 kgf·m, 7 lbf·ft)
4-16
TABS
SOCKET BOLTS
O-RING
AIR CLEANER
BASE COVER
ELEMENT
SCREW
BELT CASE AIR
CLEANER HOUSING
TABS/SLOTS