Honda SH300 2006 Manual page 331

ASSEMBLY
Before assembly, wash all parts with a high flash
point or non-flammable solvent and wipe them off
completely.
DUST SEAL
STOPPER RING
OIL SEAL
BACK-UP RING
GUIDE BUSHING
BOTTOM CASE
SEALING WASHER
SOCKET BOLT
20 N·m (2.0 kgf·m, 15 lbf·ft)
Install a new fork pipe bushing, being careful not to
Do not open the
damage the coating of the bushing if it has been
bushing slit more
removed.
than necessary.
Install the guide bushing and back-up ring onto the
fork pipe.
Apply fork fluid to the new oil seal lips.
Install the oil seal onto the fork pipe with its marked
side facing up.
• Remove the burrs from the bushing mating sur-
face, being careful not to peel off the coating.
FORK PIPE
OIL LOCK PIECE
FORK PIPE BUSHING
FRONT WHEEL/SUSPENSION/STEERING
PISTON RING
FORK
PISTON
REBOUND SPRING
BACK-UP RING
FORK PIPE CAP
STOPPER RING
SPRING SEAT
O-RING
FORK SPRING
FORK PIPE BUSHING
OIL SEAL
GUIDE BUSHING
15-17