Honda SH300 2006 Manual page 209

Disconnect the PAIR control solenoid valve 2P
(Black) connector.
Release the three wire bands from the wire band
stay.
Release the main wire harness, alternator and CKP
sensor wires from the two wire guides.
Disconnect the ECT sensor 3P (gray) connector and
injector 2P (black) connector.
Release the wire band from the wire band stay.
Disconnect the sensor unit 5P (black) connector and
IACV 4P connector.
Release the wire band from the wire band stay.
Disconnect the VS sensor connector.
– STD type: 4P connector
– ABS type: 6P connector
Disconnect the O sensor 2P connector.
2
ENGINE REMOVAL/INSTALLATION
BAND
GUIDES
BAND
3P CONNECTOR
BAND
2P CONNECTOR
2P CONNECTOR
BANDS
2P CONNECTOR
4P CONNECTOR
5P CONNECTOR
CONNECTOR
8-5