Do you have a question about the ST1100 and is the answer not in the manual?
Questions and answers
don
April 22, 2025
clutch lever start working in the end 10%
1 comments:
Mr. Anderson
May 11, 2025
The clutch lever on a Honda ST1100 is only working in the last 10% of its range likely due to how the hydraulic clutch is set up or adjusted. Even after changing the fluid and bleeding the system, this limited engagement range may be normal for the ST1100, as described. The clutch is still progressive and allows smooth control, which suggests the system is functioning correctly, just with a short engagement range.
Need help?
Do you have a question about the ST1100 and is the answer not in the manual?
Questions and answers
clutch lever start working in the end 10%
The clutch lever on a Honda ST1100 is only working in the last 10% of its range likely due to how the hydraulic clutch is set up or adjusted. Even after changing the fluid and bleeding the system, this limited engagement range may be normal for the ST1100, as described. The clutch is still progressive and allows smooth control, which suggests the system is functioning correctly, just with a short engagement range.
This answer is automatically generated