Brake Light Switch; Sidestand Switch - Honda SH300 2006 Manual

LIGHTS/METERS/SWITCHES

BRAKE LIGHT SWITCH

INSPECTION
Remove the front handlebar cover (page 3-14).
Disconnect the brake light switch connectors.
Check for continuity between the switch terminals.
There should be continuity with the brake lever
squeezed, and there should be no continuity when
the brake lever is released.

SIDESTAND SWITCH

INSPECTION
Remove the right floor side cover (page 3-8).
Disconnect the sidestand switch 2P (Black) connec-
tor.
Check for continuity between the switch side con-
nector terminals.
There should be continuity with the sidestand
retracted and no continuity with the sidestand low-
ered.
22-20
FRONT:
REAR:
2P (BLACK)
CONNECTOR (Switch
side of male terminal)
SIDESTAND SWITCH
2P (BLACK)
CONNECTOR
SIDESTAND
BRAKE LIGHT
SWITCH
BRAKE LIGHT
SWITCH