Radiator Coolant; Cooling System - Honda SH300 2006 Manual

Table of Contents

Advertisement

MAINTENANCE

RADIATOR COOLANT

Place the scooter on its centerstand on a level sur-
face.
With the engine running at normal operating tem-
perature and check the coolant level of the reserve
tank.
The level should be between the "UPPER" and
"LOWER" level lines.
If the level is low, fill the tank as follows:
Remove the maintenance lid (page 3-4).
Remove the screw and reserve tank maintenance
lid.
Remove the reserve tank cap and fill the tank to the
upper level line with a 1:1 mixture of distilled water
and antifreeze (coolant preparation: page 7-6).
Check to see if there are any coolant leaks when the
coolant level decreases very rapidly.
If the reserve tank becomes completely empty,
there is a possibility of air getting into the cooling
system.
Be sure to remove all air from the cooling system
(page 7-7).

COOLING SYSTEM

Remove the following:
– floor panel (page 3-13)
– front inner cover (page 3-10)
Check for any coolant leakage from the water hoses
and hose joints.
Check the water hoses for cracks or deterioration
and replace them if necessary.
Check that all hose clamps are tight.
4-14
"UPPER" LEVEL
"LOWER" LEVEL
MAINTENANCE LID
SCREW
RADIATOR SIPHON HOSE
BYPASS WATER HOSE
RADIATOR WATER HOSES
RESERVE TANK CAP

Advertisement

Table of Contents
loading

Table of Contents