Honda SH300 2006 Manual page 155

Table of Contents

7. Hold the connector with one hand and squeeze

the retainer tabs with the other hand and release

them from the locking pawls.

Pull the connector off.

• Prevent the remaining fuel in the fuel hose from

flowing out using a shop towel.

• Be careful not to damage the hose or other parts.

• Retainer tabs can be released by hand. Do not

use tools such as screwdrivers or pliers as they

could damage the tabs and joint.

• If the connector does not move, keep the retainer

tabs pressed down, and alternately pull and push

the connector until it comes off easily.

8. To prevent damage and keep foreign matter out,

cover the disconnected connector and pipe end

with the plastic bags.

QUICK CONNECT FITTING INSTALLA-

• Always replace the retainer of the quick connect

fitting when the fuel hose is disconnected.

• If any retainer needs replacing, use the same

manufacturer's retainer as the ones being

removed (The several manufacturers feature dif-

ferent retainer specifications).

• If there is cut or any other damage on the rubber,

replace it with a new one.

• Do not bend or twist fuel feed hose.

1. Insert a new retainer into the connector.

FUEL SYSTEM (PGM-FI)

Chapters

Table of Contents