Honda SH300 2006 Manual page 311

Table of Contents

Install the snap ring into the groove in the left crank-

case securely.

Apply molybdenum disulfide oil to the main journal

bearing inserts and install the crankshaft/connecting

rod into the left crankcase.

Install the reed valve of the left crankcase as shown.

Install the water joint pin and new O-ring.

Install the three oil joint pins and new O-rings.

CRANKCASE/CRANKSHAFT

CONNECTING ROD

OIL JOINT PINS/

WATER JOINT PIN/

Chapters

Table of Contents