Luggage Box; Grab Rail - Honda SH300 2006 Manual

LUGGAGE BOX

Remove the maintenance lid (page 3-4).
Remove the following:
– four mounting bolts
– two washer bolts
– luggage box
Installation is in the reverse order of removal.
• Make sure that the fuel hose is routed on the fuel
tank flange as shown.
TORQUE:
Luggage box mounting bolt:
Luggage box mounting washer bolt:

GRAB RAIL

Unlock the seat lock with the ignition key and open
the seat.
Remove the three bolts, washers and grab rail.
Installation is in the reverse order of removal.
10 N·m (1.0 kgf·m, 7 lbf·ft)
10 N·m (1.0 kgf·m, 7 lbf·ft)
FRAME/BODY PANELS/EXHAUST SYSTEM
MOUNTING BOLTS
FUEL TANK FLANGE
FUEL TANK FLANGE
BOLTS/WASHERS
WASHER BOLTS
LUGGAGE BOX
FUEL FEED HOSE
FUEL FEED HOSE
GRAB RAIL
3-5