Set Hardware Trigger; Set Counter Trigger - HikRobot CoaXPress User Manual

CoaXPress Area Scan Camera User Manual
·
Figure 7-6 Set Software Trigger

7.4.3 Set Hardware Trigger

The camera has 1 opto-isolated input (Line 0), and 1 bi-directional I/O (Line 2) that can be
configured as input signal.
Click Digital IO Control, select Line 2 as Line Selector, and Input as Line Mode to set line 2 as input
signal.
Figure 7-7 Set Line 2 as Input Signal
Click Acquisition Control > Trigger Selector, and select Line 0 or Line 2 as Trigger Source.
Figure 7-8 Set Hardware Trigger

7.4.4 Set Counter Trigger

The counter trigger provides frequency division to the external trigger signal.
1. Click Acquisition Control > Trigger Selector.
2. Select On as Trigger Mode.
3. Select Counter 0 as Trigger Source.
21