Set Exposure Auto - HikRobot CoaXPress User Manual

Click Acquisition Control > Exposure Time Mode, and set UltraShort as Exposure Time Mode.
If the camera you got does not support Ultrashort exposure mode, and then there is no Exposure
Time Mode parameter, and your camera supports Standard mode only by default.

10.9 Set Exposure Auto

The camera has 3 types of exposure method: Off, Once and Continuous. The exposure method and
principle are shown below.
Exposure Method
Off
Once
Continuous
Click Acquisition Control > Exposure Auto, and select Off, Once, or Continuous as Exposure Auto
according to actual demands.
CoaXPress Area Scan Camera
Figure 10-15 Set Ultrashort Exposure Mode
Table 10-2 Exposure Method and Principle
Parameter
Acquisition Control >
Exposure Auto
Acquisition Control >
Exposure Auto
Acquisition Control >
Exposure Auto
User Manual
·
Parameter Value
Off
Once
Continuous
52
Principle
The camera exposures
according to the value
configured by user in
Exposure Time(µs).
The camera adjusts the
exposure time automatically
according to the image
brightness. After adjusting,
it will switch to Off Mode.
The camera adjusts the
exposure time continuously
according to the image
brightness.