Set Sharpness; Set Aoi - HikRobot CoaXPress User Manual

CoaXPress Area Scan Camera User Manual
·

10.16 Set Sharpness

The camera supports sharpness function that can adjust the sharpness level of the image edge, You
can set sharpness as shown below.
Click Analog Control > Sharpness Enable, check Sharpness Enable to enable it, and enter proper
value in Sharpness according to actual demands, and its range is from 0 to 100.
Figure 10-27 Set Sharpness

10.17 Set AOI

You can also set AOI and the camera will adjust the brightness of the entire image based on the
area you selected.
Steps:
1. Click Analog Control > Auto Function AOI Selector.
2. Enter Auto Function AOI Width, Auto Function AOI Height, Auto Function AOI Offset X, and Auto
Function AOI Offset Y according to actual demands.
3. Check Auto Function AOI Usage Intensity.
Figure 10-28 Set AOI
60