Trend Indication; Scaler Mode - Thermo Scientific RadEye GX Operating Instructions Manual

3.2.1

Trend indication

A trend indication is given, if the measured dose rate is increasing
or decreasing.
Increasing count rate Decreasing count rate
For accurate measurements, only readings without trend indica-
tion should be used.
A trend indication is not given at count rates of less than 1 cps.
3.3

Scaler mode

To enter the scaler mode select in the submenu "Operation mode"
the option "Scaler".
3-14 DB-074 E RadEye GX, GX-L
Pi/Ff 14.09.2016