Set time/count
Bluetooth
3.4.7
Sub menu "Operation mode"
This submenu is used to select between ratemeter (see 3.1),
scaler (see 3.2) and Nuc ID (Nuclide identification, see 3.3)
mode. The " " shows the active mode.
3.4.8
Sub menu "Measuring unit" (G / N)
Measuring unit Gamma:
Measuring unit Neutron
This submenu is used to select the measuring unit for rateme-
ter and scaler measurements. Cps is the recommended measur-
ing unit.
RadEye SPRD
Pi/Ff 04.11.2014
"Set Time/Count" edits the preset time and
counts.
Enable/Disable BT-com cover
DB-100 E
3-27