Designated Use - Festo CP-FB13-E Programming And Diagnosing Manual

Contents and general instructions

Designated use

Festo P.BE−CP−FB13−E−EN en 0802h
The CP field bus node type CP−FB13−E described in this man
ual has been designed exclusively for use as a slave on the
PROFIBUS−DP. CP modules from Festo can be connected to
CP field bus node CP−FB13−E.
The CP node may only be used as follows:
as specified in industrial applications.
without any modifications by the user Only the conver
sions or modifications described in the documentation
supplied with the product are permitted.
in faultless technical condition.
The maximum values specified for pressures, temperatures,
electrical data, torques etc. must be observed.
If additional commercially−available components such as sen
sors and actuators are connected, the specifiedlimits for pres
sures, temperatures, electrical data, torques, etc. must not
be exceeded.
Please comply with national and local safety laws and regula
tions.
V