Designated Use - Festo 03-B Electronic Manual

Valve terminal type

Table of Contents

Contents and general safety instructions

Designated use

Festo P.BE-VIDN-03-8A-GB 0003NH

The valve terminal described in this documentation may only

be used as follows:

–

for controlling pneumatic actuators on the DeviceNet

Maximum 8 valve solenoid coils can be controlled. Both MIDI

and MAXI valves (type 03) as well as ISO valves sizes 1, 2 and

3 (type 04B) can be used. Special adapter plates are required

for connecting ISO valves.

Please use the valve terminal only as follows:

–

as designated

–

in faultless technical condition

–

without unauthorized modifications.

The specified maximum values for pressures, temperatures,

electrical data, torques, etc. must be observed when addi-

tional commercially-available components such as sensors

and actuators are used.

Please observe the standards specified in the individual

chapters and comply with national and local laws and safety

regulations.

Table of Contents

Table of Contents

04-b