Designated Use - Festo SFC-LAC CO Series Manual

Contents and general instructions

Designated use

Festo P.BE−SFC−LAC−CO−EN en 0708NH
The single field controller type SFC−LAC−... is used as a
position controller and position servo for the electric linear
module, type HME−...
This manual deals with the basic functions of the SFC−LAC and
the CANopen interface of the SFC−LAC−...−CO.
The linear module HME−... and additional components are
documented in separate operating instructions.
The SFC−LAC and the connectable modules and cables may
only be used as follows:
as designated
only in industrial applications
in faultless technical condition
in orignial condition without modification (only the con
versions or modifications described in the documentation
supplied with the product are permitted).
Follow the safety instructions and use all the components
·
and modules as described in the documentation.
Observe also the standards specified in the relevant
·
chapters, as well as national and local laws and technical
regulations.
Observe the maximum values of all additional compo
·
nents (e. g. sensors, actuators).
IX