Add Cover; Separation - Riso ComColor FT Series User Manual

Chapter 1 Copying
2
Select a program.
The following settings can be configured from the
sub menu.
• Rename
• Delete
Follow the on-screen instructions to change the
settings.
3
Touch [Edit].
For specific instructions on subsequent operations,
see steps 3 through 8 in "Saving a Program" (p.72).

Add Cover

You can load printed paper or colored paper into a
paper tray to add to the front and back of the
printed document as a cover.
• You cannot use paper of a different size from
^ ^
that of the copy paper.
[Binding Edge]
Specify the binding edge.
[Front Cover]
Set this option to [ON] to add a cover to the front of
each printout.
[Back Cover]
Set this option to [ON] to add a cover to the back
of each printout.
[Paper Tray]
Specify the feed tray that is loaded with cover
paper.
1
Touch [Add Cover].
The [Add Cover] screen is displayed.
2
Select the binding side.
74
3
Configure the cover settings.
Select [OFF] or [ON] for the front and back covers.
4
Touch the paper tray.
The [Select Tray] screen is displayed.
5
Select a paper tray and touch [OK].
6
Touch [OK].
7
Load the cover paper.
^ ^
• The side in which the paper is loaded
varies depending on the tray.
[Front Cover]
Standard tray / Optional additional tray:
Load the paper with the first page facing
up.
Paper tray:
Load the paper with the first page facing
down.
[Back Cover]
Standard tray / Optional additional tray:
Load the paper with the first page facing
down.
Paper tray:
Load the paper with the first page facing
up.
For more information, see "Loading
Paper" (p.45).
• Change the [Paper Selection] settings
according to the loaded paper. (p.59
"Paper Selection")

Separation

Insert a slip sheet between pages or sets, or to
separate jobs.
• To load special paper to be used as slip
^ ^
sheets, it is recommended that [Auto
Selection] should be set to [OFF] for the paper
tray for slip sheets. (p.60 "Changing the Paper
Tray Setting")
[Slip Sheet]
When this option is set to [OFF], slip sheets are not
inserted.
When this option is set to [Between Sorts], a slip
sheet is inserted for each unit specified in [Sort].
When this option is set to [After a Job], a slip sheet
is inserted after every printed job.
ComColor FT Series User's Guide