Combine - Riso ComColor FT Series User Manual

1
Touch [Page Split].
The [Page Split] screen is displayed.
2
Specify the page order.
Left to right
Right to left
3
Set [Page Selection while Scanning]
to [ON].
4
Touch [OK].
5
Press the [Start] key.
The scan range setting screen is displayed.
6
Select one of the following: [Left
Only], [Both Sides], or [Right Only].
7
Touch [Scan].
The scanning of the original starts.
Repeat steps 6 and 7 until all pages are scanned.
8
Touch [Scanned].
The printing of the scanned data starts.

Combine

This function imposes continuous pages onto one
sheet.
• You cannot use [Combine] and [Mixed Size
^ ^
Original] at the same time. (p.63 "Mixed Size
Original")
[Pages/Sheet]
[OFF], [2 pages], [4 pages], [8 pages]
[Layout]
Specify the order of page imposition.
Example: Portrait document
Pages per
sheet
2 pages
4 pages
8 pages
[Original Orientation] (p.61 "Original
Orientation")
1
Touch [Combine].
The [Combine] screen is displayed.
• If the [Confirm] screen appears, set the original
orientation to [Top Side Up] or [Top Side Left].
2
Specify the number of pages per
sheet.
3
Select a layout.
4
Touch [OK].
ComColor FT Series User's Guide
Copy Settings
Layout
65
1