Riso ComColor FT Series User Manual page 189

<Types of paper that can be punched>
• Paper size:
2 holes: A3, B4, A4, A4-LEF, B5-LEF, Ledger,
Legal, Letter, Letter-LEF, Foolscap, 8K, 16K
3 holes: A3, B4, A4-LEF, B5-LEF, Ledger, Letter-
LEF, 8K, 16K-LEF
4 holes: A3, A4-LEF, Ledger, Letter-LEF, 8K,
16K
2
• Paper weight: 52 g/m to 210 g/m (14-lb bond -
56-lb bond)
Original Orientation

[Top Side Up]
Select this option when loading originals in an
orientation from which they can be read normally.
[Top Side Left]
Select this option when loading originals so that
the top of the original is aligned with the left edge.
Binding Edge

Select the binding edge of the paper.
Left, Right, Top
Staple

Select the stapling position.
If you select the left or the right for [Binding Edge],
select from the following options.
[OFF], 1 staple, 2 staples
If you select the top for [Binding Edge], select from
the following options.
[OFF], left 1 staple, right 1 staple, 2 staples
• The left 1 staple and the right 1 staple are
^ ^
displayed only when the top is selected for
[Binding Edge].
1
Touch [Staple / Punch].
2
Select the original orientation.
3
Configure [Binding Edge].
4
Configure [Staple].
5
Touch [OK].
Punch

Specify the number of holes to be punched.
[OFF], [2 Holes], [3 Holes], [4 Holes]
1
2
2
3
4
5
Binding Margin

You can specify the binding margin so that staples
are not in the printing area.
1
2
3
Touch [Staple / Punch].
Select the original orientation.
Configure [Binding Edge].
Configure [Punch].
Touch [OK].
Touch [Binding Margin] on the
[Staple / Punch] screen.
The [Binding Margin] screen is displayed.
Specify the binding margin.
• Select [Binding Edge].
• Use [ ], [ ], or the numeric keys to enter the
width.
• If part of the printing area is missing due to the
binding margin setting, set [Auto Reduction] to
[ON].
Touch [OK].
ComColor FT Series User's Guide
Multifunction Finisher
187
8