Riso ComColor FT Series User Manual page 192

Chapter 8 Optional Equipment
2
Select the output tray.
3
Touch [OK].
Face Up/Down
^ ^
Specify whether to output printouts face-up or
face-down to the tray.
[Face Up], [Face Down]
Output Tray Relay
^ ^
Switch the output tray automatically when the tray
is full.
1
Touch [Output Tray Relay].
2
Touch [ON].
3
Touch [OK].
• When [Output Tray Relay] is configured, [Sort]
^ ^
is set to [Uncollated]. (p.62 "Sort")
^ ^ Offset Output ([Program])
When [Program] is used, each set of printed
documents is stacked slightly apart from one
another to create separation.
For more information on the program, see
"Program" (p.72) in "Copying".
[OFF]
Offset output is not performed.
[Between Sets]
Each set of printed documents is stacked slightly
apart from one another.
[Between Groups]
Each group of printed documents is stacked
slightly apart from one another.
190
ComColor FT Series User's Guide