Riso ComColor FT Series User Manual page 210

Chapter 8 Optional Equipment
List of Settings in [USB] - [Load]
^ ^
You can change the print settings for PDF files.
Select a folder on the [USB] - [Load] screen and touch [Open] to display a list of all documents in that folder.
When you select a document and touch [Print Setting] in the sub menu, the setting screen is displayed. The
settings that can be configured on this screen are listed below.
Setting item
Color Mode
Reproduction Size
Paper Selection
Duplex / Simplex
Sort
Print Density
Combine
Image Repeat
Booklet
Stamp
Add Cover
Separation
Binding Margin
Staple / Punch
*
Fold
Slow Printing
Output Tray
208
Description
Select color or monochrome printing.
Specify enlargement or reduction of original images
before printing, if needed.
[Fit to Paper] is not available.
Change the paper tray, paper type, and feed control
settings according to the paper used for printing.
Specify the sides of the paper that are printed on.
Specify the sorting method when printing multiple
copies.
Specify the print density.
Impose continuous pages onto one sheet.
Impose multiple copies of the same original onto one
sheet.
Specify the imposition when creating a booklet. When
the optional multifunction finisher is connected, creating
the booklets with saddle stitch stapling is also available.
Stamp the page number or date in the header or footer. p.66
Specify this to add front and back covers to the front
and back of the printout.
Insert slip sheets. When the optional multifunction
finisher or face down finisher is connected, the offset
output setting is also available.
Specify the binding margin.
Specify the staple settings.
(When using the optional face down finisher)
Specify the staple and punch settings.
(When using the optional multifunction finisher)
Configure the settings for the paper folding.
(When using the optional multifunction finisher with the
folder unit)
Decrease the printing speed. This also reduces the
amount of noise produced by the machine when
printing jobs.
Select the output tray for printouts.
(When using the optional multifunction finisher)
Select the output tray for printouts. (When using the
optional stacking tray)
See
p.59
p.59
p.59
p.104
p.62
p.63
p.65
p.66
p.66
p.74
p.74
p.75
p.171
p.186
p.188
p.76
p.189
p.193
ComColor FT Series User's Guide